What did you do to your XJ today? 1M Views

[junglejuice]

Originally Posted by XJKEE

Have to pics of this!!!!

I found I need to make a slug to fit into the jack so it is off to the lathe for the next part....
So next weekend the transfer case gets changed!!!!!

[junglejuice]

Today I drained the rear diff and hopefully it will seal this time as I am sick of it leaking!!!!!

[Davester]

It finaly all works a treat bought it from ebay $590 new. very happy

[bruggz351]

Originally Posted by junglejuice

I found I need to make a slug to fit into the jack so it is off to the lathe for the next part....
So next weekend the transfer case gets changed!!!!!

nice idea junglejuice. some castors would be handy??

[junglejuice]

Originally Posted by bruggz351

nice idea junglejuice. some castors would be handy??

It is going to be fitted to my floor jack to allow it to be lifted into place as the shape is too darn awkward....
When it is for storage it will be on a shelf so it will just slide into the gap, hopefully!!

[bruggz351]

had a look under the front today... i think i have too much toe-in. i measured 1193mm front, 1200mm rear of front tire.

also, is there supposed to be a gap between the LCA bushes and the mount on the diff?? or is it meant to be sandwiched in the mount?? if theres not meant to be a gap, that may be a contributing factor to my xj wanting to dance at 80-100klm/h.

cheers

[stooged]

Replaced the rear speakers with some pioneer 220 watt jobs , and discovered that the main radiator hose is cracked.