2008 WH 3.0 CRD no start

[giacomo.m]

[QUOTE=bjm;1682124]Quite possible.Anybody around close by you can swap modules ,only 5 minute
job.Mine was playing up but showing no codes at all[Quite possible.Anybody around close by you can swap modules ,only 5 minute
job.Mine was playing up but showing no codes at al/QUOTE]

Thank you bjm
but yours didn't start too ?

Giacomo

[giacomo.m]

Originally Posted by Clarky

Get some engine start spray (Start ya bastard here in Oz) and spray it into the air intake hose before the turbo just where the PCV enters the intake. If its only a GP system problem this should start it.

Thank you Clarky
I have already done this test, and the engine starting but only for a few seconds of the duration of the ether ....

Giacomo

[giacomo.m]

Update and fix
in the end there were two problems :
the first relates to engine shutdown while running, and the second to failure to start
for the first the cause was the fuel flow control valve into CP3 pump,
while for the second it was a short electric cable between the engine control unit and the fuse box
thank you

Giacomo