tdwrangler
I am open to all suggestions to be honest with you. From speaking to the Turbo guys here, the Silicon Elbow's are pretty expensive just as they are off the shelf, and there is an issue in that the pipe on the Turbo side (Turbo to Intercooler) is a different diameter on the Turbo side than it is on the Intercooler side. Hence my thinking that a custom manufactured pipe would be the only way to fix it proparly.
Re; Provent, agreed, that is a good idea. However, from my (limit) research, there would still be some vapours come through (not all are from the Crankcase Breather) so there would still be the oil issue, it may just take a little longer to make itself apparant.
I am not interested in half fixing the issue, I want it done and want it done proparly, but if there are other ideas am more than welcome to discuss!
Samco's minumum order will be 14, 15 including me. They have offered me a free set if I can get 14 others. I am happy to pay so, if they come in at, say, $300 a set, I will take $20 off everyone's invoice and pay the $280 as well. That's assuming we get the CONFIRMED numbers!
In the interium, if anyone has another solution............ I just don't trust the thing (they only replaced the Inlet side on mine, so I am waiting for the other one to blow. Probably on Christmas eve!).
Cheers
Steve
|