Ok so these are in now. Look great and WORKS WITH THE STOCK WIRING!
Took the new light apart and tapped the pivot hole to M8 and used a M8 Cap screw wish a mudguard washer. Used the stock bulb assy and cut the bulb off so i could solder the connector for the new wires to the plug so i can disconnect and take it back to stock if need be. After soldering and heat shrink applied i filled the plug with Sikaflex.
Look pretty bright during the day! Can't wait to see what they're like at night. Macca, before ya post mate i won't be using these in traffic now since they are driving lights and not fogs...