What are your next mods / What did you do to your TJ today?

[Tassie Jeeper]

pulled the radiator out today and karchered it and also cleaned the winch rope tomorrow ill be putting the radiator back in and changing over the wheels back to 33"s for road going duties

[Shauny B]

Took the jeep out for a play yesterday to anglesea gave it a good high pressure clean after work today.

[C0xy]

gonna be cleaning mine inside and out its full of mud from the weekend, removing the plastic corners off the rear bumper and try to figure out a way to fit my 32" spare on the stock carrier so it doesnt have to sit in the back anymore

[wes]

Originally Posted by C0xy

and try to figure out a way to fit my 32" spare on the stock carrier so it doesnt have to sit in the back anymore

I used to carry a 32 x 11.5 tyre on the stock carrier on a stock 15 x 7 rim.

Had to raise the 3rd brake light. I used nuts as spacers.

Removed the rubber bumps on the tailgate completely. On the 15 x 7 rim, the tyre was very snug against the taillgate.

And had to remove the hideous plastic number plate mount on the stock bumper. At first I just cut off the top lip protruding above the bumper, but that looked even worse. Ended up taking it off completely and re-postioning the number plate lights much closer to number plate - not easy - the stock bumper is extremely hard to drill.

[C0xy]

I bought a space similar to black jacks but it puts way to much pressure on the tailgate and hangs out so far it moves around and looks terrible

[Tassie Jeeper]

Originally Posted by motas

You can either weld up an adaptor or weld an 8mm plate on with new holes drilled or buy an adaptor. I think blackjack makes one pretty cheap.

i ran a 60kg 35" creepy crawler on a 10" rim with this with no issues at all

[Tassie Jeeper]

pulled the tyre off the bead the other day this was the result had to get an axe to chip the mud out of the rim so i could get to the nuts and remove it.

it happen a couple hours earlier but i couldnt reset the bead this time as it smashed the valve stem somehow





last photo i somehow took in the river when i was trying to rechord a video (bloody gopro) great camera but if u buy one for out the extra 100 and get the optional screen