What did you do to your KJ today?

[daz80]

Its a Petrol. I wish I had the CRD

[KJ75]

Finally got around to install the front tow hooks. Had to remove the bumper to be able to fit the metal plate bracket and took me a couple hours. Also installed the used skid plates I bought and the nutserts were a pain in the ass to install without the special tool.

[KJ75]

[ratcat]

Great thread, not only is it interesting but it gives people ideas about what to do with their Jeep. (I bought a Jeep... What colour??) OK well I'm getting my 06 3.7LTR pressure cleaned and fish oiled underneath today. But I wanted to let you guys in on an interesting fix. Don't know how many of you have had the RH side (drivers) windows reg let go but its a tiny bit of white nylon that breaks. Ten cents worth of nylon and you have to buy a new Jeep ($400) regulator motor and everything or a new window lifter which is going to break again or... you could buy a steel repair kit. It may be almost $200 all up but its made of steel and will never ever ever break again and we all know the drivers side window gets used the most.

http://www.ebay.com.au/itm/300845680...%3AMEBIDX%3AIT

So I have a question. How do you install an after market sound system without destroying the original fascia? Or do you pull the original out (keep it for originality purposes) and make up a new fascia?

[undrgnd]

Originally Posted by KJ75

Man some nice gear. Ready for ypur adventure!!

[undrgnd]

Originally Posted by ratcat

Great thread, not only is it interesting but it gives people ideas about what to do with their Jeep. (I bought a Jeep... What colour??) OK well I'm getting my 06 3.7LTR pressure cleaned and fish oiled underneath today. But I wanted to let you guys in on an interesting fix. Don't know how many of you have had the RH side (drivers) windows reg let go but its a tiny bit of white nylon that breaks. Ten cents worth of nylon and you have to buy a new Jeep ($400) regulator motor and everything or a new window lifter which is going to break again or... you could buy a steel repair kit. It may be almost $200 all up but its made of steel and will never ever ever break again and we all know the drivers side window gets used the most.

http://www.ebay.com.au/itm/300845680...%3AMEBIDX%3AIT

So I have a question. How do you install an after market sound system without destroying the original fascia? Or do you pull the original out (keep it for originality purposes) and make up a new fascia?

This will help. Then by a kit off eBay that has a little compartment and the above will allow you to install a single din unit. Otherwise you can buy a double din unit and install that.

https://youtu.be/nOAyzxLg6e4

[KJ75]

My rear left windows regulator broke, but I ordered a new complete unit for $39 from Ebay including delivery (some aftermarket). However I just noticed that for some reason it has gone up to $79. Now I wish I bought the right handside as well. The quality looks very good.

http://www.ebay.com.au/itm/152129837...%3AMEBIDX%3AIT