What have you done to your JK this week? 2.5M Views

[sladey]

Originally Posted by SeaComms

I could have bought a set for less than $100 more than these cost me and wouldnt have had to spend prob 10 hours making them. Sure my time is worth a hell of a lot more than $10 a hour, but as you eluded to, there's not to many things better than making something - especially if it's for the JK.

where did u get ur flaps from? u know...the flapy bits

[SeaComms]

Got the flappy bits from SuperCheap - $29.95 for the 285 x 285 mm ones.

Steel I used picked up from Bunnings - 30mm angle was about $10 for a 1m length and the 50mm wide flat strip around the same from memory. The wire clips I just put on took me ages to find, eventually picking them up from a farming / tractor store for $2.50 for the pair.

[wranglertj]

Installed my door holders on the JK today. Long story but not too bad but word of advice...try not to loose anything through the 1 3/4" hole you cut into the door



Also, received my TMD Hood which looks cool and hopefully make things run much cooler ready for our trip to the Otways after Christmas

[kam]

Originally Posted by wranglertj

Installed my door holders on the JK today. Long story but not too bad but word of advice...try not to loose anything through the 1 3/4" hole you cut into the door

Attachment 57924

Also, received my TMD Hood which looks cool and hopefully make things run much cooler ready for our trip to the Otways after Christmas

Attachment 57925

Wow is love this hood, best looking on the market so far ^^ Where did u get it and how much if I may ask

[wranglertj]

Got it from DBOR. Price listed on his site but got discount as a member of his site

Looks cool, can't wait until painted

[kam]

I tried to register on their site already before, but the website doesn't work, crap

[Magnum PI]

Decided to fit a Third Battery, this one under passenger side front seat

http://www.ausjeepoffroad.com/forum/...hp?albumid=270