What did you do to your XJ today? 1M Views

[Steve F]

Spent the afternoon watching TV and making up a heavy duty headlight loom, just need to get the H4 sockets and it's done.

Cheers
Steve

[junglejuice]

Originally Posted by Steve F

Spent the afternoon watching TV and making up a heavy duty headlight relay, just need to get the H4 sockets and it's done.

Cheers
Steve

Making a relay???? You can buy relays pretty cheap, you don't really need to make 'em.....

[Steve F]

Originally Posted by junglejuice

Making a relay???? You can buy relays pretty cheap, you don't really need to make 'em.....

Typo, meant loom, not relay

edited my previous post to avoid confusion although I am flattered you thought I was making a relay

Cheers
Steve

[ginjaninja]

Pulled my engine down and found a broken conrod on number one, had left a nice little window in the block for me

Tomorrows job pull the motor out of the donor and then start gathering parts to rebuild and start again (with a snorkel)

[junglejuice]

Originally Posted by Steve F

Typo, meant loom, not relay

edited my previous post to avoid confusion although I am flattered you thought I was making a relay

Cheers
Steve

I gathered as much, they aren't too hard to make but really not worth the effort....

What size wiring are you using?

JJ

[Steve F]

Pretty much followed GoJeeps instructions although went with 25A marine cable (a run to each headlight from the relays) which is smaller then the 6mm cable he used but there's no way each light is going to draw anywhere near 25A considering the relay is only 30A and running two lights.

Cheers
Steve

[ozjeepster]

Cheers Rodger ill go av a look