Standard XJ Dana 30 Pinion - AUSJEEPOFFROAD.COM Jeep News Australia and New Zealand

Go Back   AUSJEEPOFFROAD.COM Jeep News Australia and New Zealand > JEEP GARAGE > XJ / MJ Cherokee
Reload this Page Standard XJ Dana 30 Pinion
Register Forums Trading Your Jeep My Garage Mark All Read

Post New Thread  Reply
 
Thread Tools Search this Thread
  #1  
Old 17-05-2018
Redemptioner  Redemptioner is offline
Full Flexer
  
Join Date: May 2015
Posts: 581
What Jeep do I drive?: TJ
Likes: 77
Liked 191 Times in 138 Posts
Default Standard XJ Dana 30 Pinion
Hey All,

Chasing a standard Ring & Pinion from the front Dana 30 around the 98 year. Need it to take some dimensions from so it would be great if someone has one I could borrow for a couple of days or I am happy to rent or buy it from you. Ideally I am after the entire Pinion assembly (so the shims and oil slingers, don't need the bearings), it does not matter if it has been damaged or well worn.

If you can help me out please let me know.

regards

Red
__________________
If it ain't broke then modify it
  #2  
Old 18-05-2018
junglejuice's Avatar
junglejuice  junglejuice is offline
MonsterMoose
  
Join Date: Nov 2003
Location: Brisbane, Southside
Age: 52
Posts: 10,539
What Jeep do I drive?: WK2
Likes: 369
Liked 1,110 Times in 691 Posts
Default
Where are you located and what are you trying to do, it won't matter what year, all that will matter is HP d30 or LP d30...
__________________
JJ

Do it once, Do it right!

2014 WK2 Overland
  #3  
Old 20-05-2018
Redemptioner  Redemptioner is offline
Full Flexer
  
Join Date: May 2015
Posts: 581
What Jeep do I drive?: TJ
Likes: 77
Liked 191 Times in 138 Posts
Default
Have the HP30.

Need to measure the pinion height and the standard shim thickness as a starting point for assembly.
__________________
If it ain't broke then modify it
  #4  
Old 20-05-2018
Billnick's Avatar
Billnick  Billnick is offline
RubiconSlammer
  
Join Date: May 2011
Location: Ipswich, Brisbane.
Posts: 1,250
What Jeep do I drive?: ZJ
Likes: 115
Liked 281 Times in 182 Posts
Default
When I had my Elocker fitted my diff man put the bearings on first then welded the shims on the outside. Saves pulling the bearings off if it doesn't fit.
__________________
'98 XJ (Deceased)
'04 KJ 2.4 L petrol(sold)
'98 ZJ current restoration project
Post New Thread  Reply

« Previous Thread | Next Thread »


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is On




All times are GMT +10. The time now is 03:02 AM.


Advertisements


www.ausjeepoffroad.com - Archive - Top


AJOR does not vouch for or warrant the accuracy, completeness or usefulness of any message, and are not responsible for the contents of any message. The messages express the views of the author of the message, not necessarily the views of AJOR or any entity associated with AJOR, nor should any advice be substituted as technical advice replacing that of a mechanic. You agree, through your use of this service, that you will not use AJOR to post any material which is knowingly false and/or defamatory, inaccurate, abusive, vulgar, hateful, harassing, obscene, profane, sexually oriented, threatening, invasive of a person's privacy, religious, political or otherwise violative of any law. You agree not to post any copyrighted material unless the copyright is owned by you or by AJOR. The owner, administrators and moderators of AJOR reserve the right to delete any message or members for any or no reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold harmless AJOR, the administrators, moderators, and their agents with respect to any claim based upon transmission of your message(s). The use of profile signatures to intentionally mislead or misdirect any member on this forum is not acceptable and may result in your account being suspended. Any trip that is organised through the AJOR forum is participated at your own risk. If you or your vehicle is damaged it is your responsibility, not that of the person that posted the thread, message or topic initiating the trip, nor the organisers of AJOR or moderators of any specific forum. This forum and associated website is the property of AJOR. No user data is harvested and no information supplied in your registration will be sold for profit.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.

AJOR © 2002 - 2024 AUSJEEPOFFROAD.COM. All corporate trademarked names and logos are property of their respective owners. Ausjeepoffroad is in no way associated with DaimlerChrysler Corporation or Fiat Jeep.
www.ausjeep.com www.ausjeep.com.au www.midlifemate.com ausjeepforum.com www.r9kustoms.com
vB Ad Management by =RedTyger=