Any one recently lashed out on one?
and what do you think?
I was initially thinking of just getting a plasma cutter
as I've surrendered my oxy acet bottles, (because they dont get used much and the rent is a bit High $) but saw 3 in 1's on Ebay
I thought I could swap my MIG shielding gas from Argoshield54 to pure Argon and use it for both MIG and TIG, but I suppose pure Argon is a bit of a waste for mild steel....
I picked up a lunchbox size DC inverter on ebay from a place in bendigo,MMA/tig and for the size and price its grouse, easy as to arc weld, up to 2.5 rods and less than 3kgs the whole set up 10A 240v
tried it out on a few odd jobs and every one has been simpler and quicker compared to any other welder to use.
Already have a plasma but would up grade to a 3 way unit otherwise.
interested in a well loved AP30 plasma?
mild 8mm, stainless 4mm, alum 6mm but gets a bit messy.
needs 10cfm min
its not the cleanest of cuts, slightly better than oxy and takes some practice.
AJOR does not vouch for or warrant the accuracy, completeness
or usefulness of any message, and are not responsible for the contents of any
message. The messages express the views of the author of the message, not necessarily
the views of AJOR or any entity associated with AJOR, nor should any advice
be substituted as technical advice replacing that of a mechanic. You agree,
through your use of this service, that you will not use AJOR to post any material
which is knowingly false and/or defamatory, inaccurate, abusive, vulgar, hateful,
harassing, obscene, profane, sexually oriented, threatening, invasive of a person's
privacy, religious, political or otherwise violative of any law. You agree not to post any copyrighted
material unless the copyright is owned by you or by AJOR. The owner, administrators
and moderators of AJOR reserve the right to delete any message or members for
any or no reason whatsoever. You remain solely responsible for the content of
your messages, and you agree to indemnify and hold harmless AJOR, the administrators,
moderators, and their agents with respect to any claim based upon transmission
of your message(s). The use of profile signatures to intentionally mislead or misdirect any member on this forum is not acceptable and may result in your account being suspended. Any trip that is organised through the AJOR forum is participated
at your own risk. If you or your vehicle is damaged it is your responsibility,
not that of the person that posted the thread, message or topic initiating the
trip, nor the organisers of AJOR or moderators of any specific forum. This forum
and associated website is the property of AJOR. No user data is harvested and no information supplied in your registration will be sold for profit.
3 in 1 Plasma TIG and MMA
1984 Jeep CJ8 Overlander
TheKlansman
Titan
