Quote:
Originally Posted by Luminol
Hi Guys,
Anyone have any ideas? Has anyone made there own using a sheet of 1.5mm plastic and upholstered that or something?
Thanks
|
I have done quite a few headliners...on my Jeep, I swapped in a good one from a wreck, as my "biscuit" was in poor condition as well as fabric drooped
On other vehicles, where that has not been an option, there is (at least) 3 possible approaches
1) make the biscuit stable & smooth, with filler, fibreglass, or adhering some smoothing material (like linen) etc etc, the reupholster
2) glue foam direct to metal, and upholster that
3) get a quote, pay someone