Quote:
Originally Posted by ginga
Thanks for that.
Bit complicated for someone like me
Is bottom line that the only way to get trans temp is via an x-gauge?
|
Only way to get trans temp with a scangauge is via an x-gauge.
I'm sure there are other devices that can do it 'out of the box', but I'm not familiar with any.
Putting the x-gauge in is tedious but pretty straight-forward... kinda like programming a VCR to record the rugby haha.
Basically just find your way into the "x-gauge" option on the scangauge, then to add a new x-gauge it'll ask for the "TXD", so you'll enter "07E1215C" (by pushing the buttons up/down to choose each individual character... that's where it gets tedious.), then it'll ask for "RXF", and so-on, until you've entered all the parts of the code;
TXD: 07E1215C
RXF: 0461055C0000
RXD: 4808
MTH: 00010001FFCE