So my 2015 crd started and got 2 metres out of my drive today then this, Cranks wont start, NZ in lockdown so aint getting any help for 4 weeks +. Other than checking the wiring to the Crank sensor any good ideas?
I logged into the Blue Driver repair database using a North American VIN for a 2015 Grand Cherokee eco diesel. The frequently reported fix for the P0336 code was:
Replaced crankshaft position (CKP) Sensor Reluctor, &
Replaced crankshaft position (CKP)Sensor
There were no suggested repairs for the U1401 (probably triggered in conjunction with P0336 code)
I’d also be looking to unplug / replug the CKP sensor in case the connectors are dirty
Rockauto in US have them ,door to door in around 7-10 days in normal times.part no appears to be 68102341AA ,not cheap.Could try HiTech auto spares in CHristchurch if open, plentY of new and used WK Grand Cherokee parts or Jeep recyclers ,Hervey Bay in Queensland.or maybe try the VM agents in NZ as a VM Fiat motor.Not a good time for it to go.
I logged into the Blue Driver repair database using a North American VIN for a 2015 Grand Cherokee eco diesel. The frequently reported fix for the P0336 code was:
Replaced crankshaft position (CKP) Sensor Reluctor, &
Replaced crankshaft position (CKP)Sensor
There were no suggested repairs for the U1401 (probably triggered in conjunction with P0336 code)
I’d also be looking to unplug / replug the CKP sensor in case the connectors are dirty
Cheers
Thanks , also thanks for reminding me to message bluedriver about a working vin code for the repair database
Rockauto in US have them ,door to door in around 7-10 days in normal times.part no appears to be 68102341AA ,not cheap.Could try HiTech auto spares in CHristchurch if open, plentY of new and used WK Grand Cherokee parts or Jeep recyclers ,Hervey Bay in Queensland.or maybe try the VM agents in NZ as a VM Fiat motor.Not a good time for it to go.
Thanks
Will get hold of hitech soon as lockdowns over , Seems a few of the reluctors going in the rams too so best to change that aswell it seems . From reports i've had so far its about a $2500 AUD bill and most of it labour as the gearbox has to come out.
AJOR does not vouch for or warrant the accuracy, completeness
or usefulness of any message, and are not responsible for the contents of any
message. The messages express the views of the author of the message, not necessarily
the views of AJOR or any entity associated with AJOR, nor should any advice
be substituted as technical advice replacing that of a mechanic. You agree,
through your use of this service, that you will not use AJOR to post any material
which is knowingly false and/or defamatory, inaccurate, abusive, vulgar, hateful,
harassing, obscene, profane, sexually oriented, threatening, invasive of a person's
privacy, religious, political or otherwise violative of any law. You agree not to post any copyrighted
material unless the copyright is owned by you or by AJOR. The owner, administrators
and moderators of AJOR reserve the right to delete any message or members for
any or no reason whatsoever. You remain solely responsible for the content of
your messages, and you agree to indemnify and hold harmless AJOR, the administrators,
moderators, and their agents with respect to any claim based upon transmission
of your message(s). The use of profile signatures to intentionally mislead or misdirect any member on this forum is not acceptable and may result in your account being suspended. Any trip that is organised through the AJOR forum is participated
at your own risk. If you or your vehicle is damaged it is your responsibility,
not that of the person that posted the thread, message or topic initiating the
trip, nor the organisers of AJOR or moderators of any specific forum. This forum
and associated website is the property of AJOR. No user data is harvested and no information supplied in your registration will be sold for profit.
2015 wk2 laredo cranksensor code
, also thanks for reminding me to message bluedriver about a working vin code for the repair database
