08-10 fobs - AUSJEEPOFFROAD.COM Jeep News Australia and New Zealand

Go Back   AUSJEEPOFFROAD.COM Jeep News Australia and New Zealand > JEEP GARAGE > XH Commander and WH Grand Cherokee
Reload this Page 08-10 fobs
Register Forums Trading Your Jeep My Garage Mark All Read

Post New Thread  Reply
 
Thread Tools Search this Thread
  #1  
Old 24-07-2022
Gojeep's Avatar
Gojeep  Gojeep is offline
LokRinger
  
Join Date: Jul 2002
Location: Victoria
Posts: 6,872
Likes: 790
Liked 1,758 Times in 557 Posts
Default 08-10 fobs
Has anyone ever been successful with programming aftermarket fobs for the 08-10 years which are different from the previous ones? I know the US based ones don't work but hoped something else is now out there as been a few years since I last saw people trying.

These guys claim they do work and have programmed them before. When I asked them if I could come around then to have it done, they said they no longer offer that service.

https://www.ebay.com.au/itm/154099577744

In the past I thought anything with the panic button meant it was for the US market only, but they say it is not the case.



Seems factory originals are no longer available unless someone else has found some?
__________________
Cheers, Marcus.

My web site:
http://willyshotrod.com Over 5'000 Club
  #2  
Old 25-07-2022
Gojeep's Avatar
Gojeep  Gojeep is offline
LokRinger
  
Join Date: Jul 2002
Location: Victoria
Posts: 6,872
Likes: 790
Liked 1,758 Times in 557 Posts
Default
OK, update time.
I ordered a couple of the FOBs from the above link and just successfully programmed one using the DiagFCA program after first pulling the PIN using the same program. They are under the diagnostic tab under Wireless routines.

So next I am going to order another FOB, as you need two un-programmed FOBs on the 2008 when replacing a WIN and replace that next.

Mine still plays up from time to time as it was damaged in the accident. Have to jiggle it to make sure it both starts and allows me to lock the doors afterwards. Have to listen for the column lock when putting in and taking out the FOB. Biggest bug bare is that it randomly wont let me unlock the doors!
__________________
Cheers, Marcus.

My web site:
http://willyshotrod.com Over 5'000 Club
Likes: (2)
Last edited by Gojeep; 25-07-2022 at 04:54 PM.
  #3  
Old 25-07-2022
Gojeep's Avatar
Gojeep  Gojeep is offline
LokRinger
  
Join Date: Jul 2002
Location: Victoria
Posts: 6,872
Likes: 790
Liked 1,758 Times in 557 Posts
Default
I'll keep updating this as I gain information in cas others may search for it in the future.
I need a column shaft lock module when replacing the WIN and has to be new as well along with 2 new un-programmed FOB's!

https://www.ebay.com.au/itm/25486142...53.m1438.l2649

Read what they say near the bottom.

They also sell a complete kit with a WIN, Column lock and two new FOB's
https://www.ebay.com.au/itm/255591554913#shpCntId

I just need to buy a new column lock as already have the other parts new.

There are LHD and RHD versions so either check your part number on the one you have or have them check your VIN. I just did both and have the LHD one for some reason? Same part number mentioned in the link, same with or without the 0 at the start.
__________________
Cheers, Marcus.

My web site:
http://willyshotrod.com Over 5'000 Club
Likes: (2)
Last edited by Gojeep; 25-07-2022 at 04:53 PM.
Post New Thread  Reply

« Previous Thread | Next Thread »


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is On




All times are GMT +10. The time now is 03:36 AM.


Advertisements


www.ausjeepoffroad.com - Archive - Top


AJOR does not vouch for or warrant the accuracy, completeness or usefulness of any message, and are not responsible for the contents of any message. The messages express the views of the author of the message, not necessarily the views of AJOR or any entity associated with AJOR, nor should any advice be substituted as technical advice replacing that of a mechanic. You agree, through your use of this service, that you will not use AJOR to post any material which is knowingly false and/or defamatory, inaccurate, abusive, vulgar, hateful, harassing, obscene, profane, sexually oriented, threatening, invasive of a person's privacy, religious, political or otherwise violative of any law. You agree not to post any copyrighted material unless the copyright is owned by you or by AJOR. The owner, administrators and moderators of AJOR reserve the right to delete any message or members for any or no reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold harmless AJOR, the administrators, moderators, and their agents with respect to any claim based upon transmission of your message(s). The use of profile signatures to intentionally mislead or misdirect any member on this forum is not acceptable and may result in your account being suspended. Any trip that is organised through the AJOR forum is participated at your own risk. If you or your vehicle is damaged it is your responsibility, not that of the person that posted the thread, message or topic initiating the trip, nor the organisers of AJOR or moderators of any specific forum. This forum and associated website is the property of AJOR. No user data is harvested and no information supplied in your registration will be sold for profit.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.

AJOR © 2002 - 2024 AUSJEEPOFFROAD.COM. All corporate trademarked names and logos are property of their respective owners. Ausjeepoffroad is in no way associated with DaimlerChrysler Corporation or Fiat Jeep.
www.ausjeep.com www.ausjeep.com.au www.midlifemate.com ausjeepforum.com www.r9kustoms.com
vB Ad Management by =RedTyger=