JK REQ Head Unit pinouts - AUSJEEPOFFROAD.COM Jeep News Australia and New Zealand

Go Back   AUSJEEPOFFROAD.COM Jeep News Australia and New Zealand > JEEP GARAGE > Technical
Reload this Page JK REQ Head Unit pinouts
Register Forums Trading Your Jeep My Garage Mark All Read

Post New Thread  Reply
 
Thread Tools Search this Thread
  #1  
Old 29-03-2010
ilium007's Avatar
ilium007  ilium007 is offline
Established Member
  
Join Date: Oct 2006
Location: Brisbane QLD
Age: 45
Posts: 146
What Jeep do I drive?: JK
Likes: 0
Liked 0 Times in 0 Posts
Default JK REQ Head Unit pinouts
Hi guys - I am currently going through the REQ / UConnect saga. Evidently even if I purchase the Mopar uConnect parts from the states and install in my new JK I still will not be able to get the dealership to enable the vehicle VIN in the CAN bus system with the new handfree code.

So......

I am thinking about just installing my old Nokia CK7 handfree that has worked perfectly for years. I want to know if the REQ head unit supports a mute function in through the back. In my TJ I had to make up a relay control to cut the ACC power to the headunit when the phone rang. Obviously I don't want to do that on this new CAN bus system. So does anyone know if there is a MUTE pin on the back of the head unit. A lot of modern head units have this feature, its just a matter of getting a pin out diagram for the back of the unit.

The head unit in my Jeep id the REQ.
__________________
B
  #2  
Old 29-03-2010
silver_jk's Avatar
silver_jk  silver_jk is offline
A.K.A Rentagheyde :-)
  
Join Date: Apr 2006
Location: with my puppy
Age: 51
Posts: 1,722
What Jeep do I drive?: None
Likes: 0
Liked 0 Times in 0 Posts
Default
u connect is not available to fit to any jk head unit as its in the main computer for u connect to work wont enable it there are others that did try
  #3  
Old 02-04-2010
ilium007's Avatar
ilium007  ilium007 is offline
Established Member
  
Join Date: Oct 2006
Location: Brisbane QLD
Age: 45
Posts: 146
What Jeep do I drive?: JK
Likes: 0
Liked 0 Times in 0 Posts
Default
'Others' had problems because 'others' used incorrect part numbers (for the older lower bus speed CANBUS). I have researched the sheet out of this and now have the correct part numbers to do the factory uConnect install as long as I can get a Jeep dealer to update the VIN via the STARScan tool.

So yes, you can get uConnect working on an REQ 09 JK as long as you know what you are doing.

For my 09 JK the requirements are below (or at least this is what I am doing )

Manufacturer Part #: 82211878
http://www.quadratec.com/products/96080_9004.htm

See install guide - the dealer has to do the stuff on page 5 of this PDF.
http://www.quadratec.com/Assets/Installation/114248.pdf
__________________
B
Last edited by ilium007; 02-04-2010 at 07:11 PM.
Post New Thread  Reply

« Previous Thread | Next Thread »


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is On




All times are GMT +10. The time now is 07:25 PM.


Advertisements


www.ausjeepoffroad.com - Archive - Top


AJOR does not vouch for or warrant the accuracy, completeness or usefulness of any message, and are not responsible for the contents of any message. The messages express the views of the author of the message, not necessarily the views of AJOR or any entity associated with AJOR, nor should any advice be substituted as technical advice replacing that of a mechanic. You agree, through your use of this service, that you will not use AJOR to post any material which is knowingly false and/or defamatory, inaccurate, abusive, vulgar, hateful, harassing, obscene, profane, sexually oriented, threatening, invasive of a person's privacy, religious, political or otherwise violative of any law. You agree not to post any copyrighted material unless the copyright is owned by you or by AJOR. The owner, administrators and moderators of AJOR reserve the right to delete any message or members for any or no reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold harmless AJOR, the administrators, moderators, and their agents with respect to any claim based upon transmission of your message(s). The use of profile signatures to intentionally mislead or misdirect any member on this forum is not acceptable and may result in your account being suspended. Any trip that is organised through the AJOR forum is participated at your own risk. If you or your vehicle is damaged it is your responsibility, not that of the person that posted the thread, message or topic initiating the trip, nor the organisers of AJOR or moderators of any specific forum. This forum and associated website is the property of AJOR. No user data is harvested and no information supplied in your registration will be sold for profit.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.

AJOR © 2002 - 2024 AUSJEEPOFFROAD.COM. All corporate trademarked names and logos are property of their respective owners. Ausjeepoffroad is in no way associated with DaimlerChrysler Corporation or Fiat Jeep.
www.ausjeep.com www.ausjeep.com.au www.midlifemate.com ausjeepforum.com www.r9kustoms.com
vB Ad Management by =RedTyger=