I have a diagram of a cj6 swing gate I found on the net a while back. Is there any one In Local W.A. that can do it and wont charge an arm and a leg? I also need a place that can bend 6mm steel for the support to anchor the swing gate too. I have Large tires that way about 60kg and was told by the guys at ARB thats what ill need. Thanks guys.
as an alternative to bending 6 plate, you could use angle, you can get duragal angle
(zinc plated) or cut out from a piece of duragal RHS, a jigsaw with a steel blade will cut 6mm plate, use some cutting fluid, and oil the slide frequently.
can't recomend any fab shops, I don't live in Perth
AJOR does not vouch for or warrant the accuracy, completeness
or usefulness of any message, and are not responsible for the contents of any
message. The messages express the views of the author of the message, not necessarily
the views of AJOR or any entity associated with AJOR, nor should any advice
be substituted as technical advice replacing that of a mechanic. You agree,
through your use of this service, that you will not use AJOR to post any material
which is knowingly false and/or defamatory, inaccurate, abusive, vulgar, hateful,
harassing, obscene, profane, sexually oriented, threatening, invasive of a person's
privacy, religious, political or otherwise violative of any law. You agree not to post any copyrighted
material unless the copyright is owned by you or by AJOR. The owner, administrators
and moderators of AJOR reserve the right to delete any message or members for
any or no reason whatsoever. You remain solely responsible for the content of
your messages, and you agree to indemnify and hold harmless AJOR, the administrators,
moderators, and their agents with respect to any claim based upon transmission
of your message(s). The use of profile signatures to intentionally mislead or misdirect any member on this forum is not acceptable and may result in your account being suspended. Any trip that is organised through the AJOR forum is participated
at your own risk. If you or your vehicle is damaged it is your responsibility,
not that of the person that posted the thread, message or topic initiating the
trip, nor the organisers of AJOR or moderators of any specific forum. This forum
and associated website is the property of AJOR. No user data is harvested and no information supplied in your registration will be sold for profit.
Cj6 swing gate fabrication.
