Hmm
u would want to be REAL keen to use these They just don't cut it in my and others opinions. They were a death sentence for the Rover V8 in LR product and the same for Alfa etc. A genuine isn't much dearer!
Interesting what you say about the Ryco Filter, as i have used them in the past ,as the parts shop is only up the road, where as the dealer is in town. Last time i was in town i bought a ouple of OE oil and air filters, so all good now. On another point, i also had to change an idler pulley, was quoted some ridiculous price from jeep, got one from CBC Bearings, for a FORD no less, same size of course, but only $25 odd bucks, so shop around!
this only applies for the 2.5's the 2.8's are different
I changed part of a heater hose. On the 2.5 they are crimped on so I cut the crimp connection leaving the flared bit so the hose had something to grip to
I used a heater hose from a vb commodore part number CH1325 from super cheap which cost $7 then I cut it to size.
I posted this in another thread and later thought it might be useful here. It is about the idler pulleys on the CRD (don't know if they use the same on petrol versions) as follows:
"You could also just obtain the new bearing and replace the three rivets with bolts and Loctite or Nyloc nuts. OK it may be a bit fiddly at first but after that, bearing replacement becomes easier and possibly cheaper as you are only buying the bearing and reusing the pulley each time."
NTN bearing part number :6203 LHA (high temp application)
SKF " " " :6203-2Z/VA201 or 6203-2Z/VA228 (either will do-both high temp)
Does anyone know if the same is used for the timing belt idlers?
Cheers
OK so this might be a stupid question but I'm wondering if a chrome grill is considered an after market part i have 2004 KJ Jeep Cherokee and I'm looking to buy one from somewhere, any suggestions anybody???
__________________
'04 KJ Cherokee Extreme Sport
No Mods.... YET!
AJOR does not vouch for or warrant the accuracy, completeness
or usefulness of any message, and are not responsible for the contents of any
message. The messages express the views of the author of the message, not necessarily
the views of AJOR or any entity associated with AJOR, nor should any advice
be substituted as technical advice replacing that of a mechanic. You agree,
through your use of this service, that you will not use AJOR to post any material
which is knowingly false and/or defamatory, inaccurate, abusive, vulgar, hateful,
harassing, obscene, profane, sexually oriented, threatening, invasive of a person's
privacy, religious, political or otherwise violative of any law. You agree not to post any copyrighted
material unless the copyright is owned by you or by AJOR. The owner, administrators
and moderators of AJOR reserve the right to delete any message or members for
any or no reason whatsoever. You remain solely responsible for the content of
your messages, and you agree to indemnify and hold harmless AJOR, the administrators,
moderators, and their agents with respect to any claim based upon transmission
of your message(s). The use of profile signatures to intentionally mislead or misdirect any member on this forum is not acceptable and may result in your account being suspended. Any trip that is organised through the AJOR forum is participated
at your own risk. If you or your vehicle is damaged it is your responsibility,
not that of the person that posted the thread, message or topic initiating the
trip, nor the organisers of AJOR or moderators of any specific forum. This forum
and associated website is the property of AJOR. No user data is harvested and no information supplied in your registration will be sold for profit.
They just don't cut it in my and others opinions. They were a death sentence for the Rover V8 in LR product and the same for Alfa etc. A genuine isn't much dearer!
