Quote:
Originally Posted by bezzat
After I replacing 5 injectors
I get error 1130
While pressing the accelerator (only While driving) the engine turns off
I think the problem is on the Fuel Injection Pressure Regulator
|
It's the most likely suspect.
Quote:
Originally Posted by bezzat
What is the right way to replace / easy way ?
Thanks
|
You need to pull the fuel rail off. Pretty easy job overall, from memory you need to:
1. Disconnect the high pressure fuel lines.
2. Disconnect the electrical connector off of the pressure sensor.
3. If you can reach the back of the rails, disconnect the fuel return lines an electrical connector off of the regulator. If not do it after the next step.
4. Unbolt and remove the rail.
5. Remove/replace the regulator and reinstall.
Probably about 1-2 hours to do the job.
Jason