Hi Guys, so might have just scored a cheap CRD, apparently its just had a new flex plate installed by a mechanic, now it will crank but not start, any ideas on where to start looking to fix it?
New flex plate so box has been out...dont want to be obvious but simply checking everythings been plugged back in correctly and isnt 'broken' would be step one...pull the plugs of the looms and check their all in good knick and making a connection, wires are on where they should be...its a start
__________________
WK2 MY13 CRD LIMITED
Only dumb people think their smart...rest of us learn everyday
Got any codes??
My first guess would be check the crankshaft position sensor..could have taken a hit during flexplate change over.
I think its the same one on the 3.0 merc crd so Rock Auto will have them.
Good luck , let us know how you go.
By the way I think the crank sensor is electronic so simple multimeter check is no help.
Got any codes??
My first guess would be check the crankshaft position sensor..could have taken a hit during flexplate change over.
I think its the same one on the 3.0 merc crd so Rock Auto will have them.
Good luck , let us know how you go.
By the way I think the crank sensor is electronic so simple multimeter check is no help.
Yepp, I got mine alongside with the camshaft sensor from Rockauto. Could it be something simple as air bubbles in the fuel system? That happened to mine 2x and I was not able to start it for a couple of minutes.
AJOR does not vouch for or warrant the accuracy, completeness
or usefulness of any message, and are not responsible for the contents of any
message. The messages express the views of the author of the message, not necessarily
the views of AJOR or any entity associated with AJOR, nor should any advice
be substituted as technical advice replacing that of a mechanic. You agree,
through your use of this service, that you will not use AJOR to post any material
which is knowingly false and/or defamatory, inaccurate, abusive, vulgar, hateful,
harassing, obscene, profane, sexually oriented, threatening, invasive of a person's
privacy, religious, political or otherwise violative of any law. You agree not to post any copyrighted
material unless the copyright is owned by you or by AJOR. The owner, administrators
and moderators of AJOR reserve the right to delete any message or members for
any or no reason whatsoever. You remain solely responsible for the content of
your messages, and you agree to indemnify and hold harmless AJOR, the administrators,
moderators, and their agents with respect to any claim based upon transmission
of your message(s). The use of profile signatures to intentionally mislead or misdirect any member on this forum is not acceptable and may result in your account being suspended. Any trip that is organised through the AJOR forum is participated
at your own risk. If you or your vehicle is damaged it is your responsibility,
not that of the person that posted the thread, message or topic initiating the
trip, nor the organisers of AJOR or moderators of any specific forum. This forum
and associated website is the property of AJOR. No user data is harvested and no information supplied in your registration will be sold for profit.
CRD not starting after flexplate replacement
Jeep Grand Cherokee Limited
After some mods
