03 TJ Build

[Sin]

So we brought a Jeep.

Mods thus far:
- 4'' Lift
- 2.0 Fox Shocks with Remote Res.
- Metal Cloak High Clearance flares with custom extensions
- SYE with Tom Woods Drive Shaft
- 4.56 Rations
- Front and Rear ARB's
- Poison Spider Bar fromt and rear tyre carrier
- Light Bar
- Snorkle
- 12,000lb winch
- 35" hancook muddies on alloys (for Road and easy trips)
- Brand new set of 35" Bias Treps Comp Spec.

Waiting on arrival for Hood Louver, Cargo Nets, RCV front conversion and chromolly rears (yet to order).

Photos of Treps to follow.

[Fishframe]

Looking good. You have thought it out all beautifully to make sure everything is in sync with the lift.

Is it registered yet? I’m in Qld and we have restrictions on max lifts which has held me back. We can do 50mm lift and 25mm tyres (total 75mm) with no body lift and not need cert. 75mm lift + 25mm tyres + 50mm body blocks can get through if certified (total lift amp 150mm). Anything above 150mm overall is a no go. And the tyres size max 25mm lift is a pain as well.

[Fishframe]

Forgot to mention, good work on the snorkel. Make sure you raise the diff and transmission breathers if you haven’t already done so. I lost everything but my Jeep in the Townsville Floods last year. The Jeep got me through 1m+ water and my mate in his Triton made it out as well but he didn’t have raised breathers. His transmission was shot three weeks later.

[Sin]

Thanks fishframe. Car is registered and done all breather extensions

[Fishframe]

Originally Posted by Sin

Thanks fishframe. Car is registered and done all breather extensions

You’re on the ball ! Keep us posted and keep sending some pics through mate.

[Sin]

New tyres and rims now on and looking good. Going to test them on Sunday.