Not sure if above link would work but it shows the needle sensor pulses measured across the 2 wire coming out of the injector number 1 unpluged from the main loom .
It seems to have a pulse of 0.4 volts .
Measurment with an ohm meter of the main loom plug should show 7.1-7.2 Kohm .
Just in case anyone interested .
If not many people have an osciloscope another alternative is using an android phone with a lead trough the speaker plug . Just download from google play store the osciloscope application and connect the lead (ground and signal) to needle sensor 2 wires (unpluged from main loom).
Have to say that I'm not liable for any damage to your phone but it should work with no issues . Test lead description and how to a bit latter .