Oil Catch Can

[Brockie]

Thinking of putting an Oil Catch Can on my CRD but surprised to find that many have a filter on top. Does that not kill the vacuum that makes the Exhaust Gas Recirculation System work?
I was looking at something like this:

https://www.ebay.com.au/itm/29436618...Cclp%3A2047675

[Fishframe]

I would only use a Provent on Diesel engine. Buy an original one. Don’t buy a knock off. You get what you pay for in this instance.

[jagonev12]

hi

Isuzu actually make one, but it is not fitted to the utes but some model truck.
Do not know the model diesel, but it is only fitted in a couple of markets, Australia is one.

The filter is small but it is half price of the ryco filter. I bought a couple of cans all plastic not Cheap and made in japan. If you need the number on the box I can get it as the one shown on youtube has been superseded.
If you run the number on the internet you will get a geniune Chinese one sold in the US.
You have to go to a dealer to get sense, if the person behind the counter is a professional.

I need one for a JAG that has done over 350,000 ks on lpg. A little oil in the inlet track, apparently no real breather setup subject to a technical bulletin.
Easier to fit catch- can. The other will go on a hemi with those low tension rings when I finish the Jeep. At least it starts with a J.
If you need the numbers give a note as I still have the boxes with the new numbers.
Peter