WCM and column lock module troubles
Hi all,
I have a possible problem with WCM or steering lock module. I have tried the steering lock emulator with no luck so I am assuming it must be the WCM playing up.
I have the lights on dash but no crank, bypass relay and engine cranks but does not start.
I am getting a stored code B2254 Column Lock Module Internal.
My question is this a dealership repair only or can I program a secondhand WCM to my VIN with the correct program like jscan or appcar or can I purchase a new WCM (if available) and program myself.
Any help would be appreciated.
Cheers
|