It is still coming up with these DTC's that I posted on the first page of this thread but no CEL. Plus, some of the other glow plug codes have come up now too (plugs 1, 2 and 4), so obviously still not clearing the original module code:
Quote:
Originally Posted by Hanna
P0670 - Powertrain: Glow plug control module control circuit/Open
P1270 - Powertrain: Accelerator pedal position sensor A/D Converter error
P1648 - Powertrain: Can Data Bus - defective
P0676 - Powertrain: Cylinder 6 glow plug circuit/open
P0675 - Powertrain: Cylinder 5 glow plug circuit/open
P0710 - Powertrain: Transmission fluid temperature sensor "A" circuit
|
Car is starting perfectly and running well, so no issue overall. It's just annoying having these codes hanging around.
Do I need to go a bit deeper than an OBD II dongle and the Torque Pro app? I was going to order a Hypertech code reader soonish, so maybe that will clear it?