What did you do to your XJ today? 1M Views

[layback40]

Finally completed putting in lift in the front.
Will take it for a drive & see how much it is.

Now I only need to finish wiring the winch & most of the current projects will be done.

[Hamsteh]

Originally Posted by BennyWA

Check the engine mount while you're at it!

Ah that engine mount got done before I did Central but on the topic of extra items I'm wondering if rear main is easier to do with auto out of the way...

[Mitch]

Negdriver,my XJ would cut out too after the snorkel was fitted.This was solved buy runniing a hose from the top hole in the converter to the airbox.A hole had to be drilled into the box just where the lower half of the paper filter sits.App one inch below the top of the bottom half of the box.A brass thread was screwed into the box then hose ova that.What purpose does the foil serve in your pics?

[Negdriver]

Originally Posted by Mitch

Negdriver,my XJ would cut out too after the snorkel was fitted.This was solved buy runniing a hose from the top hole in the converter to the airbox.A hole had to be drilled into the box just where the lower half of the paper filter sits.App one inch below the top of the bottom half of the box.A brass thread was screwed into the box then hose ova that.What purpose does the foil serve in your pics?

Just cooling air down in the engine bay.

That single hose wrapped in sun shade thingo for cars is my hose for the LPG. I had that installed when i had the LPG stall at high speeds.

Now it stalls on long hot trips. hence why I decided to cover the air intake and the LPG balancing line. So far after a test in Syd hot weather today. She went well. Hasn't stalled yet.

[darksidecustoms]

Fitted up some LED Daylight Running Lights, wired off ignition feed. Will hopefully save me from feeling the need to drive with my headlights on for safety, keeping my trip computer usable during the day!



Also replaced my globes in the side marker lenses with different LEDs - much brighter now.

[Easy Rollins 1]

Picked up the MSD coil from the post box,will fit this week.$76 posted.....and it's made in China.

[alex673]

Finally fixed the rocker coverleak. Now found a leak in the oil filter adaptor!