KJ wheels are: 5 on 4.5 stud pattern (same as Ford). The usual alloy is 16" x7" and has a 5.5" backspacing. The backspacing is the problem usually. There are few aftermarket wheels that will fit a KJ. You could go with a smaller backspacing but that means your increasing the track width and the wheels will stick out further under the guard. In some states there are limits on tread width increases (like NSW), don't know the regs for VIC. I am not aware of any of the Procomps that will fit the KJ - and I have looked. If you do fit a smaller backspace wheel you may have to trim bodywork to get them to fit without rubbing.
Re the two you have supplied links to:
The first one (7069) is not available in a 16" size with the correct stud pattern, and a 15" (with the correct stud pattern) will probably not clear your brake calipers with that backspacing. The second one (7031) has a 16" size (16"x8") with the right stud pattern but the backspace is going to increase your track width by 2" overall and you would need to test fit them to be sure about clearance issues (I doubt the dealer is going to order them in just so you can test fit them). Be aware that you'll need to be careful about tyre size on the 16x8".
Good luck, sounds to me like you need to do more research before you make a decision.
Last edited by glend; 09-12-2010 at 01:56 PM.
|
