Quote:
Originally Posted by Billnick
?????????? The oil filter adaptor has a T60 Torx bit that I busted a 10mm sidchrome ringy on. Welded a 13/16 nut onto the T60, used a suitable spanner and part of a yabby pump to move it.
|
my (large) Torx bit set have a 12mm hex.. knocked the T60 bit out of its 1/2" adaptor
tape 2 x 12mm spanner side-by-side, slip the 2 box ends over T60
estimate it took over 150ftlb to undo with the pipe over spanners
appeared to be factory o-ring with blue loctite
it would seem 2 x 12mm supercheaps are stronger than one 10mm sidchrome