Hole in bottom plate repaired today. It's only about 1mm thick so welding was no good blew holes straight through. Had to braze it with the oxy and a flux rod. Then brazed a 3.5mm plate over it, spayed with zinc rich paint then siliconed all around to stop any water getting in. The next rock should crumble when I bounce onto it
Rock sliders
Made of 150x50x5mm RHS my engineer recons they will be fine for an 8 tone hit before bending. Wish I had more time hoping to finish them by next weekend. The ends will have 45 degree cuts horizontally and vertically to make sure it doesn't get hung up on anything. Still to make up brackets for underneath as they are currently on,y bolted to the seam welds. They will weigh about 35kg each
AJOR does not vouch for or warrant the accuracy, completeness
or usefulness of any message, and are not responsible for the contents of any
message. The messages express the views of the author of the message, not necessarily
the views of AJOR or any entity associated with AJOR, nor should any advice
be substituted as technical advice replacing that of a mechanic. You agree,
through your use of this service, that you will not use AJOR to post any material
which is knowingly false and/or defamatory, inaccurate, abusive, vulgar, hateful,
harassing, obscene, profane, sexually oriented, threatening, invasive of a person's
privacy, religious, political or otherwise violative of any law. You agree not to post any copyrighted
material unless the copyright is owned by you or by AJOR. The owner, administrators
and moderators of AJOR reserve the right to delete any message or members for
any or no reason whatsoever. You remain solely responsible for the content of
your messages, and you agree to indemnify and hold harmless AJOR, the administrators,
moderators, and their agents with respect to any claim based upon transmission
of your message(s). The use of profile signatures to intentionally mislead or misdirect any member on this forum is not acceptable and may result in your account being suspended. Any trip that is organised through the AJOR forum is participated
at your own risk. If you or your vehicle is damaged it is your responsibility,
not that of the person that posted the thread, message or topic initiating the
trip, nor the organisers of AJOR or moderators of any specific forum. This forum
and associated website is the property of AJOR. No user data is harvested and no information supplied in your registration will be sold for profit.
