Please help - Page 2 - AUSJEEPOFFROAD.COM Jeep News Australia and New Zealand

Morris 4x4 Jeep
Find out how to advertise on Ausjeep?

Go Back   AUSJEEPOFFROAD.COM Jeep News Australia and New Zealand > JEEP GARAGE > XH Commander and WH Grand Cherokee


Portal Register Forums Trading Your Jeep New Garage Mark All Read

Post New Thread  Reply
 
Thread Tools Search this Thread
  #9  
Old 17-08-2018
robertodonnell's Avatar
robertodonnell  robertodonnell is offline
CrawlerStar
 
Join Date: Apr 2015
Posts: 484
What Jeep do I drive?: WH
Likes: 3
Liked 81 Times in 63 Posts
Default

https://www.autocodes.com/p2008_jeep.html

Spend some time resolving your leaks from the intake pipe that goes from the filter to the turbo. The PCV input is in the driver's side just before the turbo, these can call all sorts of grief.

I also found my fuel filter leaked at the water sensor, because someone had cut the O rings off with a knife and damaged the groove. If your filter is leaking then check this out.
  #10  
Old 18-08-2018
WH3.0's Avatar
WH3.0  WH3.0 is offline
CrawlerStar
 
Join Date: Sep 2016
Location: Port Lincoln, SA
Posts: 309
What Jeep do I drive?: WH
Likes: 147
Liked 40 Times in 27 Posts
Check out my Ride(s)
Default

yep install a Oil Catch can this will stop oil going through the turbo then into the intake. Just make sure its a good one like a Provent 200 by Mann and Hummel as i got caught out by buying a cheaper knock off one.
__________________
Just Explore Every Possibility
  #11  
Old 1 Week Ago
mjl's Avatar
mjl  mjl is offline
Senior Newbie
 
Join Date: Dec 2010
Location: Adelaide
Posts: 84
What Jeep do I drive?: WH
Likes: 6
Liked 2 Times in 2 Posts
Check out my Ride(s)
Default

Clarky have yu tried the Appcar yet.??

i have tried two different bluetooth ELM's and now one usb Elm but i cannot get any of them to talk to the car. The computer can see and connect to the ELM but that is it. Both bluetooth came up with a couple of connection errors so the appcar would not connect properly but the usb ELM showed 100% across all the protocols but still would not talk to the car.!!

any idea's.?

seem more like a waste of $50 for the app at this stage.!

cheers
MJL
__________________
cheers...
MJL
Adelaide Jeep Club
_________>>>>>>>>
  #12  
Old 1 Week Ago
Majiklister  Majiklister is offline
I just registered
 
Join Date: Jun 2018
Location: Northern NSW
Posts: 23
What Jeep do I drive?: WH
Likes: 8
Liked 3 Times in 3 Posts
Default

mjl I just tried my appcar program on a laptop with windows 10 and I purchased the OBDLink SX USB and it worked fine. Just checking that you have set the correct com port the elm usb is using.
Cheers
Likes: (1)
mjl
Sponsored Posts
  #13  
Old 1 Week Ago
Clarky's Avatar
Clarky  Clarky is offline
Grand Obsession
 
Join Date: Apr 2012
Location: Wang NSW
Age: 51
Posts: 4,003
What Jeep do I drive?: WH
Likes: 378
Liked 907 Times in 600 Posts
Check out my Ride(s)
Default

I used this Vgate and it worked okay but limited due to being Bluetooth.
https://www.ebay.com.au/itm/Auto-Vga...72.m2749.l2649

I tried this ebay usb one but it was the wrong version (Version 1.5) and wouldn't connect https://www.ebay.com.au/itm/All-OBD-...72.m2749.l2649

Will probably get http://www.obdlink.com/sxusb/ like Majiklister

My laptop is windows 8
__________________
FORUM MODERATOR QuadraDrive II CRD 2"Lift +30 rims 255/75/17 BFG KO2's, Saguaro, Runva,
Likes: (1)
mjl
  #14  
Old 1 Week Ago
mjl's Avatar
mjl  mjl is offline
Senior Newbie
 
Join Date: Dec 2010
Location: Adelaide
Posts: 84
What Jeep do I drive?: WH
Likes: 6
Liked 2 Times in 2 Posts
Check out my Ride(s)
Default

Quote:
Originally Posted by Majiklister View Post
mjl I just tried my appcar program on a laptop with windows 10 and I purchased the OBDLink SX USB and it worked fine. Just checking that you have set the correct com port the elm usb is using.
Cheers
Win10 here too. Well i thought i had it working with the test interface showing 100% across all the protocols but no. Seems like i will have to go buy a better dongle. USB seems the better choice so i'll go ask the App guys what they recommend. All config details are correct, com port, baud rate, etc all good but no details coming back from the car.

DO you have the CRD too Majiklister.? I know CLarky does nut he's not tested his yet. I am paranoid now that there is something with the CRD that will not work... maybe i need another beer.!!

Did you get access to the tire size change function.? That is all i really thought to use it for

cheers
__________________
cheers...
MJL
Adelaide Jeep Club
_________>>>>>>>>

Last edited by mjl; 1 Week Ago at 10:30 PM.
Sponsored Posts
  #15  
Old 1 Week Ago
Majiklister  Majiklister is offline
I just registered
 
Join Date: Jun 2018
Location: Northern NSW
Posts: 23
What Jeep do I drive?: WH
Likes: 8
Liked 3 Times in 3 Posts
Default

Yes I have MY07 CRD, have not had a chance to try the tyre function or many of the other programming function but it did read the diagnostic function and the report function did work. I will try and have a play with programming function next week and report back.
  #16  
Old 6 Days Ago
Majiklister  Majiklister is offline
I just registered
 
Join Date: Jun 2018
Location: Northern NSW
Posts: 23
What Jeep do I drive?: WH
Likes: 8
Liked 3 Times in 3 Posts
Default

I could access all programming functions but was not game to try and adjust tyre size with a warning coming up on screen. Sorry
Likes: (1)
mjl
Post New Thread  Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On


» Advertisements_AS2




Powered by vBadvanced CMPS v3.2.3



All times are GMT +10. The time now is 05:20 AM.




AJOR does not vouch for or warrant the accuracy, completeness or usefulness of any message, and are not responsible for the contents of any message. The messages express the views of the author of the message, not necessarily the views of AJOR or any entity associated with AJOR, nor should any advice be substituted as technical advice replacing that of a mechanic. You agree, through your use of this service, that you will not use AJOR to post any material which is knowingly false and/or defamatory, inaccurate, abusive, vulgar, hateful, harassing, obscene, profane, sexually oriented, threatening, invasive of a person's privacy, religious, political or otherwise violative of any law. You agree not to post any copyrighted material unless the copyright is owned by you or by AJOR. The owner, administrators and moderators of AJOR reserve the right to delete any message or members for any or no reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold harmless AJOR, the administrators, moderators, and their agents with respect to any claim based upon transmission of your message(s). The use of profile signatures to intentionally mislead or misdirect any member on this forum is not acceptable and may result in your account being suspended. Any trip that is organised through the AJOR forum is participated at your own risk. If you or your vehicle is damaged it is your responsibility, not that of the person that posted the thread, message or topic initiating the trip, nor the organisers of AJOR or moderators of any specific forum. This forum and associated website is the property of AJOR.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2018, vBulletin Solutions, Inc.

AJOR 2002 - 2018 AUSJEEPOFFROAD.COM. All corporate trademarked names and logos are property of their respective owners. Ausjeepoffroad is in no way associated with DaimlerChrysler Corporation or Fiat Jeep.
www.midlifemate.com wayalife.com jkwrangler.com ausjeepforum.com jk-forum.com canadianjeepoffroad.com cryptoprofitcalculator.net
vB Ad Management by =RedTyger=