OK heres the go as per the link yuo supplied but i would do the following
i would use a 3.25 mm ni fe nickel iron type weld electrode at around 110 amps
set the welder on straight polarity that is for this proccess negitive electrode is used this will give a shallower type weld so as not to induce cracking
make sure the item is preheated to remove the chill and moisture
use flame or heat gun
do short type weld passes and pein each pass to stress releive with a small ball pein hammer
then file down to shape.
__________________
Proud member of the "She'll Be Right" Gang
yes LEZ is my brother
Won't be doing this for a couple of weeks, but I'm planning on putting on new pads and rotors, and wasn't sure if I should be budgetting for new knuckles as well. Will let you know how it turns out.
I have found down hill works better for me, but i heard it doesnt give as good penetration as going up hill? I find it too hard to control the pool going up hill
AJOR does not vouch for or warrant the accuracy, completeness
or usefulness of any message, and are not responsible for the contents of any
message. The messages express the views of the author of the message, not necessarily
the views of AJOR or any entity associated with AJOR, nor should any advice
be substituted as technical advice replacing that of a mechanic. You agree,
through your use of this service, that you will not use AJOR to post any material
which is knowingly false and/or defamatory, inaccurate, abusive, vulgar, hateful,
harassing, obscene, profane, sexually oriented, threatening, invasive of a person's
privacy, religious, political or otherwise violative of any law. You agree not to post any copyrighted
material unless the copyright is owned by you or by AJOR. The owner, administrators
and moderators of AJOR reserve the right to delete any message or members for
any or no reason whatsoever. You remain solely responsible for the content of
your messages, and you agree to indemnify and hold harmless AJOR, the administrators,
moderators, and their agents with respect to any claim based upon transmission
of your message(s). The use of profile signatures to intentionally mislead or misdirect any member on this forum is not acceptable and may result in your account being suspended. Any trip that is organised through the AJOR forum is participated
at your own risk. If you or your vehicle is damaged it is your responsibility,
not that of the person that posted the thread, message or topic initiating the
trip, nor the organisers of AJOR or moderators of any specific forum. This forum
and associated website is the property of AJOR. No user data is harvested and no information supplied in your registration will be sold for profit.