Hi All - Thought I'd show how my head unit stall went with my Commander.
Firstly I started with this crappy standard unit.
Removal of dash front was pretty straight forward.
Dash on the ground.
I had previously purchased a radio bezel conversion off eBay
Before fitting the bezel conversion which converts to same size as the Jeep Nav radio unit - you need to remove the old bezel.
After removing, it looks a little like this
My original bezel looked a little "hacked" after my amateur removal.
The new head unit on bench.....
And first placement into the dash. I simply plugged in the complete loom supplied which had a canbus decoder to match the Jeep - all plug & play - only took a minute and I could power up and play videos!
The dash front just went on as easy as taking off to reveal the new look.
A little tight in the fitment department around the new radio.
After adding in my home wifi details, she's off & running doing updates already.
Paired my OBD2 bluetooth cheapie and working.
Plays videos straight from my portable HDD