Please see my full post in regards to my No Crank condition:
http://www.ausjeepoffroad.com/forum/...d.php?t=156735
The cause of this is: I stored the Jeep for a month without a battery.
The F20 recall apparently addressed this although it is very hard to find info about this. It allegedly involved the WCM and Column Lock Module being replaced due to a No Crank condition after a battery discharge event (see post #5):
https://www.jeepforum.com/forum/f67/...t-flat-572955/
When I enter my VIN, F20 is showing as “Complete” on the Mopar website, but unlike my N23 recall, there is no Recall Date, NHTSA Recall # and the pdf link is also down.
Does anyone know anything about the F20 recall in regard to part numbers?
My Column Lock Module has a date of manufacture 09 04 2005 and I believe its original. If so, then was the F20 recall done properly or at all?
I invite you to please punch in your vin and let me know if your F20 was done and whether it has any additional info.
https://www.mopar.com/en-us/my-vehic...ls/search.html
If you can peek under your steering wheel and let me know your part numbers before or after F20 that would also shed some light on this. It all seems very dodgy, including that the important acronyms involved are SKREEM and EVL.
Wireless Control Module ( WCM ) ( part # 56040638AW )
https://www.moparpartsinc.com/p/7560...6040638AW.html
The Column Lock Module ( EVL / ELV / ESCL / ESL )( part # 05057278AA )
https://www.moparpartsinc.com/p/7551...5057278aa.html