Bracket For UHF Antenna
I made a bracket and mounted it off a bolt right where you’re holding that antenna. Because the bracket needs to be bent to match the shape of the gap under the bonnet it gets a bit long and flexes a little. This results in paint being worn away from anything nearby despite efforts to protect with adhesive felt.
It seemed a good idea to me to instead mount it up under the bolt where the plastic trim sits at the very back of the bonnet. The bracket can then be thicker flat stainless and would just need to trim the plastic to get a neat fit. I held off as I might instead mount “ditch” lights there instead. In the end I put the antenna on the front bar hoop and no longer notice it’s there.
__________________
2010 KK Sport, LPG, Mygig, Uconnect, JBA UCAs, 3" CRDstu lift & Uneek bull bar.
Last edited by KKnut; 14-05-2018 at 11:56 PM.
|