Lift and Tyres of your JK

[moxon]

2 1/2 inch lift rubicon shocks and springs
upper control arms front rear
rubicon track bars front and rear
jk quick diss
extended sway bar links
standard rims 285/75/17 bighorns

wish list
steel rims 4/5 backspace
H/D PPM tie rod

[Aus Patriot]

If you just have the springs changed must you do a wheel alignment?

[SeaComms]

How much lift are you going for? At 2 inces I would not be worried. The only adjustable component is the tow in/out and with a 2 inch lift it should not change. More than that then you will need to look into panhard length to get you wheels back to even left to right, maybe longer (adjustable) lower control arms to bring the caster back into spec.

[metallibanger05]

Originally Posted by jktom

As per the last post, 16" wheels will not fit on a 2010 model. Check out your front brake calipers, they are very close to your rims.

Check this out for you tyre size question.
http://www.powerdog.com/tiresize.cgi

ive just bought the stock 16's for my 09 model, will they fit?

[JAG811]

ARB 55mm lift...... which means 3" front 4" rear...
Mickey Thompson Baja's 315/75/16
PROCOMP 1079's 16x8 4.0 backspacing.......
Cheers,
Jags

[Da_Sherps]

Nice stance JAG.

I've got a set of 8179's on their way with the same size and bs, looks really good!

And how are you coping with the stock driveshaft having 3" and 4" ? Or is yours a manual?

[ramjet]

So does this mean im stuck with 17 inch rims on my 2010 2 door wrangler sport? You cant fit 16;s with some backspacing on em by any chance?