WH Grand owners post your pic's.

[Gojeep]

Originally Posted by briteway

Hi GoJeep, I've measured them but seems like the surface wasn't as flat as it looks, I'll have to take it out on the street and measure again. So far I've measured and have the following figures (centre of wheel to bottom of wheel arch):

- Front right 480
- Front left 460
- Rear left 460
- Rear right 470

Thanks for getting those measurements.
I measured some fronts at the dealer and the Overland model was 455 and the SRT 440, which are supposed to be 25mm lower than standard. Not sure on the Overlanded standard height compared to the other models? Looks like yours is pretty good then.
My fronts were 495 so looks like mine is the one out of wack and maybe had a lift in it already?

[CRDSTU]

A prety common average stock center of wheel to guard measurment for WH's is around 470mm front and 480/485mm rear.

[Gojeep]

Thanks Stuart for telling me that.

[valpacer]

Mmmmmm Wheely Good.

Thanks to Stu for the new rolling stock!

Dave

[hills46]

... and 4000k's down.

[slipmo]

Valpacer, those rims look awesome, makes the car look heaps meaner.

[briteway]

Originally Posted by hills46

... and 4000k's down.

That's an awesome shot. Whereabouts is it?