WH fuel issues
Hi all
I have a 2010 WH 3.0 and the car wont start, i plugged my scan tool to the vehicle and it has the every single injector circuit low and injector group 1 and 2 circuit open. I have replaced all 6 injectors, and the PCM with known working 2nd hand untits and it didnt change, i have checked continuity, which included shorts to ground and 12v+ between all the injectors and the pcm, and i have found nothing wrong with any of them. but the car will crank but not fire, if i spray a little bit of brake clean into the intake it fires until i obviously stop spraying.
Any help would be appreciated
|