Rockcrusher diff cover

[monte]

I didn't think you could use just any LSD oil,it had to be a certain spec and possibly an additive as well ,for jeep?.

[arzzs]

monte, check your manual, it has the specs there.

but for the front get 80/90 w diff oil and the back get the same, but with lsd addative. the bottle will say it has it added in it.

[Manxie]

Half way through putting it all back together but you get the picture......

Hope you like............ by the way I didnt need to bash anything out the way or mod anything to make it fit So I am very happy.......

[Steve F]

Looking good, glad to see the panhard clears it Cant wait to get mine (and the other 42)

Cheers
Steve

[MRGC]

Was wetting myself before all of you, since steve put the first thread.

[Steve F]

Just a quick update, looking at about 2 more weeks hopefully sooner though. As soon as I hear anything I'll update this thread, just dont want everyone to be wondering what's going on.

Cheers
Steve

[monte]

Just a question,
How much oil will you put in,if the rockcrusher diff covers are bigger and the oil plug is a lot higher, and if your diff is not rotated a great deal, the oil level when at the plug will be higher than the axle Check the height of your diff plug now and remember its location(its about level with the bottom of the axle inside the tube. Dana 44 that is) .
Wouldn't that make for to much pressure and oil to start blowing out of the diff breather.
Your normal diff in the rear takes just under 2 liters of oil,I am up to 2.5 liters,and still cant feel the level when doing a paper dipstick check to find the height,