Normally,with rusted pipe,bolts etc,the start point after using a good spray of "Bolt Off" (have a cuppa) then get a dolly (not that sort in this case..would hurt) like a 4lb sledge hammer to put pressure on other side of "whacked"item then give good,solid hits with a fair sized ball pein hammer..Has the effects of (1) seperating the two metals and (2) momentarily expanding the outer component,just a smidgen.This is not going to help on the screen Torx though.Nor is next bet,heat.Give it more pressure !
__________________
TJ.ARBs.F/RearSYE.32s3"Lift.Ramsy 9000.DisCons,ARB S/away,SlideTop1/2s
97XJ T/Dsl 2" 31"GranTreks.
|