Quote:
Originally Posted by JeanLuke
If it all goes together, perhaps update the "everything 2.7 CRD" thread with the part numbers?
|
For sure.
As to flushing out the cooling system, my cooler won't turn up until later this week. I'm thinking it would be a good idea to flush out the system before I install the new one. To do this I'd drain the current coolant/oil, refill with water (filtered) and degreaser, then run motor for say 15 minutes, allow to cool sufficiently to then drain again, and repeat 3 times before draining to install new cooler. Any reason to not do it before the new cooler is in? I understand there is currently a leak between oil system and coolant system but it appears to be a one way leak. So possibly I'm better off not taking that risk and just draining the existing coolant/oil before replacing the cooler. Happy to hear others thoughts on it.