|
|
19-07-2014
|
|
MonsterMoose
|
|
Join Date: Nov 2003
Location: Brisbane, Southside
Age: 51
Posts: 10,539 What Jeep do I drive?: WK2
Likes: 369
Liked 1,110 Times in 691 Posts
|
|
I'm in the process of doing some cade drawings so if anybody wants a drawing of this section of the chassis I can supply one, I can also supply a drawing of the plates with dimensions as well...
__________________
JJ
Do it once, Do it right!
2014 WK2 Overland
|
19-07-2014
|
|
DetroitDemon
|
|
Join Date: Jun 2009
Location: Casino
Posts: 4,801 What Jeep do I drive?: XJ
Likes: 5,510
Liked 1,325 Times in 717 Posts
|
|
Quote:
Originally Posted by junglejuice
I'm in the process of doing some cade drawings so if anybody wants a drawing of this section of the chassis I can supply one, I can also supply a drawing of the plates with dimensions as well...
|
Awesome offer Jj. I'd be interested, as I don't think my XJ has been done. I haven't checked with chrysler but there's nothing obvious around the box that would hint towards it.
Will you send it as a jpeg or PDF or... ??
cheers
__________________
|
20-07-2014
|
|
MonsterMoose
|
|
Join Date: Nov 2003
Location: Brisbane, Southside
Age: 51
Posts: 10,539 What Jeep do I drive?: WK2
Likes: 369
Liked 1,110 Times in 691 Posts
|
|
Quote:
Originally Posted by bruggz351
Awesome offer Jj. I'd be interested, as I don't think my XJ has been done. I haven't checked with chrysler but there's nothing obvious around the box that would hint towards it.
Will you send it as a jpeg or PDF or... ??
cheers
|
What would you like it as?
I haven't done the plate drawings yet, I have just drawn the chassis section so far but as I have the hole centres drawn now it won't take much to draw the plates.
How far back do you want the plates to go? To the rear hole as per used by the factory bullbar?
__________________
JJ
Do it once, Do it right!
2014 WK2 Overland
|
20-07-2014
|
|
DetroitDemon
|
|
Join Date: Jun 2009
Location: Casino
Posts: 4,801 What Jeep do I drive?: XJ
Likes: 5,510
Liked 1,325 Times in 717 Posts
|
|
Quote:
Originally Posted by junglejuice
What would you like it as?
I haven't done the plate drawings yet, I have just drawn the chassis section so far but as I have the hole centres drawn now it won't take much to draw the plates.
How far back do you want the plates to go? To the rear hole as per used by the factory bullbar?
|
Thanks Jj.
Would probably be easiest as a PDF for me.
As for size... ... I'm sorry, I haven't thought that far ahead.
I'll be under the car tomorrow, I'll have a look and work something out.
This is a god send Jj. I've tried to find the measurements online for quite some time, without luck. I have managed to try and print out a plan for plates but it came out all blurry. I'm afraid I'm computer illiterate. I know enough to get myself into trouble, but that's about it...
cheers
__________________
|
21-07-2014
|
|
DetroitDemon
|
|
Join Date: Jun 2009
Location: Casino
Posts: 4,801 What Jeep do I drive?: XJ
Likes: 5,510
Liked 1,325 Times in 717 Posts
|
|
Quote:
Originally Posted by junglejuice
To the rear hole as per used by the factory bullbar?
|
Gday Jj.
I think this should be sufficient. Don't you?
I'm going to price having a set of plates cut from 3mm for both LH and RH sides.
To beef the area up for front bar mounting and a steering brace. I'm wanting to run a brace from side to side, then to the steering box. Maybe overkill, but I've been under there and watched the chassis twist like a paddle pop stick when the steering is turned. Quite unnerving...
Thanks
cheers
__________________
|
21-07-2014
|
|
MonsterMoose
|
|
Join Date: Nov 2003
Location: Brisbane, Southside
Age: 51
Posts: 10,539 What Jeep do I drive?: WK2
Likes: 369
Liked 1,110 Times in 691 Posts
|
|
__________________
JJ
Do it once, Do it right!
2014 WK2 Overland
|
22-07-2014
|
|
DetroitDemon
|
|
Join Date: Jun 2009
Location: Casino
Posts: 4,801 What Jeep do I drive?: XJ
Likes: 5,510
Liked 1,325 Times in 717 Posts
|
|
Quote:
Originally Posted by junglejuice
I made plates for the inside and outside with through chassis sleeves for both sides...
|
They're spot on Jj. Have you installed those yet? Are they welded at all or just bolted?
I like the look of your steering brace. Does it foul on the engine? I have a front cross member off a TJ here, I was trying to mod it someway for a brace. I don't know how that is going to workout....
cheers
__________________
|
Thread Tools |
Search this Thread |
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is On
|
|
|
All times are GMT +10. The time now is 07:12 AM.
|
|
|
|
Advertisements
|
|
|
AJOR does not vouch for or warrant the accuracy, completeness
or usefulness of any message, and are not responsible for the contents of any
message. The messages express the views of the author of the message, not necessarily
the views of AJOR or any entity associated with AJOR, nor should any advice
be substituted as technical advice replacing that of a mechanic. You agree,
through your use of this service, that you will not use AJOR to post any material
which is knowingly false and/or defamatory, inaccurate, abusive, vulgar, hateful,
harassing, obscene, profane, sexually oriented, threatening, invasive of a person's
privacy, religious, political or otherwise violative of any law. You agree not to post any copyrighted
material unless the copyright is owned by you or by AJOR. The owner, administrators
and moderators of AJOR reserve the right to delete any message or members for
any or no reason whatsoever. You remain solely responsible for the content of
your messages, and you agree to indemnify and hold harmless AJOR, the administrators,
moderators, and their agents with respect to any claim based upon transmission
of your message(s). The use of profile signatures to intentionally mislead or misdirect any member on this forum is not acceptable and may result in your account being suspended. Any trip that is organised through the AJOR forum is participated
at your own risk. If you or your vehicle is damaged it is your responsibility,
not that of the person that posted the thread, message or topic initiating the
trip, nor the organisers of AJOR or moderators of any specific forum. This forum
and associated website is the property of AJOR. No user data is harvested and no information supplied in your registration will be sold for profit.
|