|
|
07-11-2023
|
CrawlerStar
|
|
Join Date: Sep 2011
Location: Gold Coast QLD
Posts: 369
Likes: 27
Liked 144 Times in 90 Posts
|
|
Bit unlucky then that the rubber bit tore….i was toey about heaving on mine, eventually wangled it off with plenty of slippery.
Rockauto have the complete housing for $80 AUD it seems.
https://www.rockauto.com/en/parts/mo...+housing,18049
So it is sortable if it got to bother you.
Stupid design that hinge pin.
At least you dont have a floppy flap.
John
__________________
2015 Laredo CRD with QL - that replaced our 2012 Laredo CRD Bright Silver with QL
|
08-11-2023
|
|
MonsterMoose
|
|
Join Date: Apr 2005
Location: QLD
Age: 70
Posts: 8,801 What Jeep do I drive?: WK2
Likes: 4,366
Liked 3,892 Times in 2,304 Posts
|
|
Mate I had that much slip everywhere and it still tore ................... I don't want to pull the damn thing off again thats for sure.
__________________
2015 WK2 CRD Laredo( ZG, WG 2.7 )
Your Never Too Old To Learn Something Stupid.
|
08-11-2023
|
|
Lowranger Shocker
|
|
Join Date: Aug 2015
Location: Hervey Bay Qld
Posts: 1,505 What Jeep do I drive?: WK2
Likes: 1,772
Liked 1,119 Times in 594 Posts
|
|
Can I book mine in to your workshop sometime drover?
__________________
CJ5, CJ7, XJ Sport, WJ HO V8 Overland, WH Hemi V8 Overland, 14 WK2 CRD Laredo-RIP, 15 WK2 CRD Laredo
|
08-11-2023
|
|
MonsterMoose
|
|
Join Date: Apr 2005
Location: QLD
Age: 70
Posts: 8,801 What Jeep do I drive?: WK2
Likes: 4,366
Liked 3,892 Times in 2,304 Posts
|
|
Not a problem, I'm a good instructor, even have a bit of paper that says so....
__________________
2015 WK2 CRD Laredo( ZG, WG 2.7 )
Your Never Too Old To Learn Something Stupid.
|
12-11-2023
|
CrawlerStar
|
|
Join Date: Sep 2020
Posts: 474 What Jeep do I drive?: WK
Likes: 0
Liked 345 Times in 181 Posts
|
|
I did my fuel flap on my old 2014.
A pain getting it off, stretched the rubber bit around the filker pipe.
Re pushed the nylon fuel flap door pin back down, touched the bottom of the pin
with a soldering iron so it wouldnt work its way up again.
My “new” 2015 had the same issue when i bought it, dealer replaced it prior to me buying it- thank god !!
I wonder if you remove the interior rear quarter trim, you could probably reach in and re position the hinge pin back in without having to rip it out?
|
13-11-2023
|
|
MonsterMoose
|
|
Join Date: Apr 2005
Location: QLD
Age: 70
Posts: 8,801 What Jeep do I drive?: WK2
Likes: 4,366
Liked 3,892 Times in 2,304 Posts
|
|
Quote:
Originally Posted by genpk
I wonder if you remove the interior rear quarter trim, you could probably reach in and re position the hinge pin back in without having to rip it out?
|
The filler point is all located in the wheel arch nothing inside the vehicle, you need to remove the wheel arch trim to get at it, found that out when I had to fix the drain hose which had become blocked as the zip ties used to hold it in place were done up too tight, big pain and I only pulled it half off ... I was toying with the idea of replacing the filler with a standard one with cap but after fixing the hose gave it all a miss as the tanks wouldn't handle fast fill anyway and my stubby holder cap has proven itself to keep dust out of the filler mouth.
__________________
2015 WK2 CRD Laredo( ZG, WG 2.7 )
Your Never Too Old To Learn Something Stupid.
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is On
|
|
|
All times are GMT +10. The time now is 02:47 PM.
|
|
|
|
Advertisements
|
|
|