They are only 1.5 din but you can buy a double din fascia and switch it out. The only main issue is the space is a tight spot so you need to cut away a chunk of plastic at the back that is underneath the factory unit. It was a bit of a mission squeezing it in as it can barely fit a double din but with a bit of persuasion you can get it in there. It does look good though once done.
My problem was I got confused with the cd changer harness and the rca leads that came on the harness I got I was left with speaker wires which I was trying to plug into the cd changer harness.
The cd changer harness is the 10 pin connector shown on the diagram. Ill try get a pic up tomorrow.
|
