What did you do to your WH/XH today?

[EVOLVD]

Originally Posted by Windex

Where did you buy yours from? My 3874 paperweight is building my rage.

I just bought a second hand one off ebay. Slippery on here also said he bought the 3872 which apparently works on the Aus spec aswell. Just keep an eye out on ebay you should be able to score one fairly cheap. Just make sure its unlocked from the current car !

[slippery]

yep the 3872 works and i second everything EVOLVD said.i bought off ebay US.

A great transformation for the hemi running bigger tyres....shes got her zip back!

[Windex]

New hubs, new discs and new pads for the front along with a healthy fluid flush.

[Bigshipengine.jpg]

Had a noisy clunk in the front end and could not see anything shagged or loose in the front end after much looking.
Someone suggested the sway bar bushes but they had only a slight amount of movement but it was all that was left so i removed the sway bar altogether to try and eliminate it.
Bingo! Noise gone. Bushes dont even look too bad but hey it worked. Happy days.

Sent from my SM-G930F using Tapatalk

[Bigshipengine.jpg]

Sick of not being able to check the transmission fluid level i made my own dipstick from some wire with swages on the bottom to keep it stiff and give someting to see the fluid on. Then just swaged a loop on the ither end to grab.
I used the 70mm rule to check the oil and it took 2.5 liters to fill to the correct level. I put a black mark on the 70mm mark for future reference.
For reference the Dipstick needs to be 80cm to reach from the bottom of the pan to the top of dipstick tube.



Sent from my SM-G930F using Tapatalk

[Windex]

Found out I have what looks to be a coolant leak! Pics taken after the car had been sitting since Sunday afternoon.

[slippery]

Is the leak from the waterpump or thermostat housing?