The TSB updates 3 pipes, all pre-kinked hard plastic:
1) a small dia recirculation line extension to the valve assy;
2) a large dia long vent line from the filter (up in the filler neck);
3) a large dia vent line extension to the valve assy.
The vent filter is also updated for MY07.
It’s a new TSB and some techs don’t do it in a factory way. Mine was all twisted and hanging. I had to re-do it myself. Some cable ties were missing, some put in the wrong spots. Double check that the new filter was bolted to the filler neck with a sheet metal screw as per TSB. Mine was just small cable tied to the neck. I had to bolt it with the right screw myself as well. After all wasn’t a big drama.
Last edited by EugeJK; 19-12-2009 at 08:44 AM.
|