Fitted the snorkel to my 94 xj yesterday ,
Started off ok ,removed washer bottle
read instructions ,taped ,measured ,read instructions , checked AJOR threads ,read instructions all ok
Drilled pilot holes ,ok
drilled main hole in guard ,(some one said point drill down slightly ,did that )
the hole ended up app 15mm too low inside the guard ,obviosly i tilted the drill too much )
finally after lots of foul lingo and reboring,the hole was sorted out ,
the drilling of the air box went well ,not a problem there!
fitting adaptor to air box and refilling old inlet ,still no problem ,
Struck a snag when the aircon pipping was in the way of the air inlet hose
so i had to undo the aircon bracket to allow the hose to enter the airbox "clean",no kinks etc
so now i have to reattach the aircon piping to the body somewhere (Oh yea ,also fitted a throttle body spacer so that moved a few more hoses, etc
any way ,got it fitted and all ends well
just a pic of my 3 jeeps : neato hey !!!p