Not sure if this is in here or not but, below is the fan and part number that are interchangeable
US MOTOR: 22159
AIRTEX:2775TA 2791TA
API:7136700
CARQUEST:77271 77293 EVERCO:A5545
FEDERAL MOGUL /CARTER: FC 133
FOUR SEASONS:36700
HAYDEN: 2791
MURRAY: 272306
IMPERIAL: 215160
EVERCO: A5545
I am running the HAYDEN: 2791 on mine
after trying to get my jeep to run cooler in the summer heat I decided to buy a new fan clutch a SEVERE DUTY one.
think it has sorted my problems.
normally on a 30c day at 100-110k the temp gauge would sit on 100-105c AC off and 105-110+ with the AC on.
but today it was 30c out side, traveling down the highway at 110k with the AC on it only reached 95c around town it now doesn't go over 80c
this is the clutch I brought
http://www.ebay.com.au/itm/151105510...84.m1439.l2649
they are more difficult to fit in past the shroud as they are about 4 times thicker than the standard one.
it doesn't move the actual location of the fan
I can actually feel the air being pulled through the front grille now and feel the hot air being blown out the bonnet scopes, I could feel it before but it now has a lot more force.