Jw speaker.

[Desert Storm]

How do you wire the park light to get the halo to work?

[MightyMouse]

Do you mean the DRL function ?

If so...... you need to run a wire to something that is on with the ignition. One option is to use a "piggy back" fuse adapter, to tap into a fuse in the TIPM that is ignition on.

[Desert Storm]

The halo is meant to come on with the Parker lights. Tried tapping red wire from light into blue from park light but nothing.

[mick666]

without having a look i remember 2 wires that were extra to the main 3 prong plug. 1 was DRL (bright halo) and other one was parkers (not so bright halo).
I hooked the bright one up (DRL)to the old park lamp wire.
The halo turns off when the main lights come on.
Try them out by feeding them 12 v off the battery terminal.
Is yours the standard JW (mine is) or the jeep specific one with the J in the model number?

[Desert Storm]

Thanks. All running good , looks brilliant. Evolution j series are the ones I got. Connect red wire from lamp to blue wire from the park loom.

[Banshee]

The halo should come on bright with the ignition, then dim when you switch to parkers & stay dim with headlights. At least, I wired mine accordign to the diagram that came with them & that's what they do.

[nevillebartos]

I used the cig lighter to get acc power for the halo (it's fused right????), ran that to the blue / DRL wire. Comes on with acc, stays on with parker, goes out with headlights. I didn't really like how it dims with parker when connected so left that one off, I never use those for actual parking just dim days or tunnels or whatever.

I put the foggies in as well but they're acting unusually. All good until I bring the headlights up with them and then they start to flicker. These are the J model with inbuilt anti flicker however I found they are not suggested for my 2012, I figured maybe the older models didn't use PWM for the fogs but can't work out why this would matter. Even more confusing is how the headlights are doing it???

edit: To make this more unusual the flicker only occurs if switching foggies on AFTER headlights, if I activate them from parker position on the stalk before going to full beam they work fine. So what the hell is this?