WCM and column lock module troubles

[Majiklister]

Hi, Sorry for the late reply the only emulator I could find was from overseas; it took about 2 weeks to get here, which I thought was pretty good.
This is the one I got

https://goldcar.com.tr/product/for-c...lug-and-start/

It didn't work for me as the wcm was already locked up.

I am still having difficulties trying to get the jeep going, but have found someone who can apparently sort the problem if I send them a key, wcm, internal steering lock module, ecu, and bcm from my vehicle.

[Majiklister]

Update today I thought I better try and repair the wcm and steering lock module problem since the jeep hasn't been going since mid-January.

I replaced the steering lock module with a second hand one, replaced the wcm with a second hand one from Lithuania, replaced the circuit board from a new key into my old key and had multiple code scanners and key scanners ready.

I tried the autel ms906 but it couldn't pull pin code for me to install secondhand wcm to ecu and couldn't program the new key and jscan app couldn't either, but the appcar program did pull the pin code and it also programmed the new key. The appcar program also sent the secret key to the ecu. Great start I thought.

I then connected the autel ms906 to check for DTC and it picked up the different VIN in wcm, so I entered into change VIN on ecu on the autel ms906 but our ecu's are not programmable for a second VIN so I am back to more research.

Might just bite the bullet and send components to just jeeps and have them repaired. I will update when I get the components back and installed.

[Gojeep]

Hope you get it all sorted and thanks for keeping this thread updated.

What year is your WH?

[Brit30-06]

Hi.
Yes, thank you for keeping the the thread up to date. Your hard work will no doubt help others in the future.

[Majiklister]

I have a 2007 model which I believe prior to this they had a different immobiliser and also after 2007 they had the win immobiliser which I believe are better systems and new parts still available.

I have tried to get a complete ecu, bcm, wcm, and key kit from wreckers but they are very rare. So hopefully sending the components to be repaired will work.

It would be nice to have the wcm deleted but I believe that at the moment it only works for petrol models.

[warwick]

The WCM is no longer available for the WH or XH Commander. You can buy a WCM emulator which I have had success with on the diesel model from https://cartools.lv/Shop/product_inf...roducts_id=135. The site also sells electronic locking module emulators which I have also had success with https://cartools.lv/Shop/product_inf...roducts_id=111. There are also other modules available at https://goldcar.com.tr/product/for-c...lug-and-start/ but I have no experience with them.

[Gojeep]

Originally Posted by Majiklister

I have a 2007 model which I believe prior to this they had a different immobiliser and also after 2007 they had the win immobiliser which I believe are better systems and new parts still available.

I have tried to get a complete ecu, bcm, wcm, and key kit from wreckers but they are very rare. So hopefully sending the components to be repaired will work.

It would be nice to have the wcm deleted but I believe that at the moment it only works for petrol models.

How did the repair go?