Quote:
Originally Posted by wilsonjeep
Front is good with the pinch weld mod and sway bar in, with the sway out I will need a 20mm bump stop in the strut to clear the gaurd on full compress, making this now! Rear will need I think a bump stop to accomodate the extra height and the extra width. . I will loose some travel but gain ground clearance, and with qd2 I don't think this is a prob.
Think I will make some custom front inner guards too!!
I don't run a rear sway bay either!!
|
Don't forget that, in the rear at least, after adjusting the bump stop down, you can now fit longer shocks as have more room for them under full compression. Usually gain more than you lost in up travel.
I don't know without looking into it further if you can just space down the strut/shock shaft at the top without moving anything else to get lost travel back at the front too? The problem on the front is running out of thread on the top of the shaft I would think.