Quote:
Originally Posted by Numb Thumbs
I have mounted the lightbar using its own bracket. The two screws holding the number plate were useless - just screws into plastic.
I removed the screws then replaced them with a pair of stainless bolts, washers, mud washers and nylocs. To get to the back, I removed the recovery hook covers so I could get my arm in behind the bumper.
Most of the wiring is done, I just need to get to the high beam trigger, I suppose behind the passenger side light. Remove the airbox?
I may get a mate to make me up a new bracket that moves the lightbar further back and maybe a little higher.
Cheers
Numb Thumbs
UPDATE
All wired in and working... The two white and green wires in the headlight cluster plug is confusing!
|
You could try to get at the passenger light connections through the access port inside the wheelwell as per these pics. I had an auto electrician point them out after I had a failed attempt removing the airbox etc. I haven't got around to doing it myself yet as I need to get an adapter cable from Stedi to fit the cabling from 4wd SuperCentre. Good luck
__________________
MY15 Laredo CRD - Falkens, ECB Bar, Uneek/Mopar Plates, ECU Tune, TJM Sidesteps, Cane Toad Rack
Last edited by cobbly; 16-03-2019 at 05:16 PM.
Reason: wrong pic
|